D3K2 Track-Type Tractor

D3K2 Track-Type Tractor

Download Product Documents

Click a link to download the document:

Features:

Slope Indicate

New grade control feature provides you slope of blade in cross slope direction and mainfall (fore/aft) direction without having to estimate.

Slope Assist

New optional grade control feature which helps you more easily achieve the desired blade mainfall and cross slope automatically.

Stable Blade

New blade control feature helps you obtain a finish grade with less operator effort.

Traction Control

New traction control feature reduces track slip and undercarriage wear for lower operating costs.

Eco Mode

New engine throttle settings reduce fuel consumption up to 25% to save you more money.

Heated and Ventilated Seat

Experience a new level of comfort in all climates with the new optional heated and ventilated air suspension seat.

Power Pitch Blade

This option lets the operator easily adjust the blade pitch to optimize productivity.

Engine

Cat® C4.4 ACERT™ diesel engine meets U.S. EPA Tier 4 Final emission standards.

Heated, Seat-Mounted Controls

Heated joysticks (optional) offer even greater comfort in cold climates.

AccuGrade™

Optional grade control system enables operators to cut and fill to grade with increased accuracy, minimizing the need for traditional stakes and grade checkers. Large AccuGrade monitor is built into the machine’s dash for easy viewing during operation.

Undercarriage

Choice of undercarriage to give you the lowest costs per hour. Select either the standard sealed and lubricated track (SALT) undercarriage or the innovative SystemOne™ undercarriage.

Engine

Engine Model
Cat C4.4 ACERT
Power - Net
80hp
Displacement
269in3
Rated Net Power @ 2,200 rpm – SAE J1349
80hp
Rated Net Power @ 2,200 rpm – ISO 9249/EEC 80/1269
80hp
Note
Engine meets Tier 4 Final emission standards.
Bore
4.13in
Stroke
5in

Weights

Operating Weight - XL
17465lb
Operating Weight - LGP
18442lb
Operating Weight – LGP, 762 mm/30 in
18896lb
Note
Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.

Transmission

Drive Pumps
1
Track Motors
2
Relief Valve Settings
7033psi
Maximum Travel Speed – Forward
5.6mph
Maximum Travel Speed – Reverse
6.2mph

Service Refill Capacities

Fuel Tank
51.5gal
Crankcase and Filter
2.91gal
Final Drives, XL (each side)
2.6gal
Final Drives, LGP (each side)
2.6gal
Cooling System
5.92gal
Transmission/Hydraulic Tank
15.7gal
Diesel Exhaust Fluid (DEF) Tank
4.9gal

Hydraulic Controls

Pump Output
17.7gal/min
Relief Valve Settings
2988psi

Winch

Weight
1345lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Winch Length
27.76in
Overall Width
29.2in
Drum Diameter
10in
Drum Width
10.8in
Throat Clearance
6.75in
Rope Diameter – recommended
0.63in
Rope Diameter – optional
0.75in
Drum Capacity – recommended cable
371ft
Drum Capacity – optional cable
256ft
Maximum Line Pull – bare drum
40000lb
Maximum Line Pull – full drum
25000lb
Maximum Line Speed – bare drum
131ft/min
Maximum Line Speed – full drum
207ft/min

Ripper

Type
Parallelogram
Number of Shanks
3
Maximum Digging Depth
13.3in
Maximum Reach at Ground Line
30.2in
Maximum Ground Clearance Under Tip
17.6in
Overall Width
67.3in
Height
6.5in
Weight
1222lb

Undercarriage

Shoe Width – XL
16in
Shoe Width – LGP
25in
Length of Track on Ground – XL
89in
Length of Track on Ground – LGP
89in
Track Gauge – XL
59in
Track Gauge – LGP
68in
Ground Contact Area – XL
2829in2
Ground Contact Area – LGP
4425in2
Ground Pressure – XL
6.2psi
Ground Pressure – LGP
4.2psi
Ground Contact Area – LGP, 762 mm (30 in)
5340in2
Ground Pressure – LGP, 762 mm (30 in)
3.6psi
Track Gauge – LGP, 762 mm (30 in)
73in
Number of Rollers (each side)
6
Number of Shoes (each side) – Sealed and Lubricated Track (SALT) Undercarriage
43
Number of Shoes (each side) – SystemOne Undercarriage
38
Shoe Width – LGP, 762 mm (30 in)
30in
Length of Track on Ground – LGP, 762 mm (30 in)
89in

Cab

Sound Levels: ISO 6396:2008
77dB(A)
Sound Levels: SAE J1166 FEB2008
78dB(A)
ROPS
SAE J397-OCT95, SAE J1040-May94, ISO 3471-94, ISO 3164-2008
FOPS
SAE J231-JAN81, ISO 3449-2005 Level III

Dimensions

Track Gauge – XL
58.9in
Track Gauge – LGP
67.9in
Track Gauge – LGP, 762 mm (30 in)
73in
Width of Tractor (standard shoes, no blade) – XL
74.8in
Width of Tractor (standard shoes, no blade) – LGP
92.9in
Width of Tractor (standard shoes, no blade) – LGP, 762 mm (30 in)
94.9in
Overall Length (with blade) – XL
168in
Overall Length (with blade) – LGP
167.6in
Overall Length (with blade) – LGP, 762 mm (30 in)
167.6in
Length of Basic Tractor (without blade) – XL
128.9in
Length of Basic Tractor (without blade) – LGP
128.9in
Length of Basic Tractor (without blade) – LGP, 762 mm (30 in)
128.9in
Tractor Height – XL
108.8in
Tractor Height – LGP
108.8in
Tractor Height – LGP, 762 mm (30 in)
108.8in
Ground Clearance – XL
13in
Ground Clearance – LGP
13in
Ground Clearance – LGP, 762 mm (30 in)
13in
BLADE: Blade Width – XL
104.2in
BLADE: Blade Width – Intermediate
115in
BLADE: Blade Width – LGP
124in
BLADE: Blade Height – XL
35.8in
BLADE: Blade Height – Intermediate
33.9in
BLADE: Blade Height – LGP
33.8in
BLADE: Blade Lift Height – XL
28.7in
BLADE: Blade Lift Height – Intermediate
29.3in
BLADE: Blade Lift Height – LGP
28.7in
BLADE: Digging Depth – XL
22.5in
BLADE: Digging Depth – Intermediate
22.5in
BLADE: Digging Depth – LGP
22.5in
BLADE: Blade Cutting Edge Angle, Adjustable – XL
52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable – Intermediate
52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable – LGP
52° to 58°
BLADE: Maximum Tilt – XL
14.5in
BLADE: Maximum Tilt – Intermediate
17.7in
BLADE: Maximum Tilt – LGP
17.2in
BLADE: Maximum Angle (either side) – XL
25°
BLADE: Maximum Angle (either side) – Intermediate
25°
BLADE: Maximum Angle (either side) – LGP
25°
BLADE: Blade Width at Maximum Angle – XL
95.2in
BLADE: Blade Width at Maximum Angle – Intermediate
105.1in
BLADE: Blade Width at Maximum Angle – LGP
113.1in
BLADE: Blade Capacity (SAE) – XL
1.99yd3
BLADE: Blade Capacity (SAE) – Intermediate
1.96yd3
BLADE: Blade Capacity (SAE) – LGP
2.17yd3

Standard Equipment

  • Electrical
    • Alternator, 12 volt, 120 Amp, heavy duty brushless
    • Alarm, backup
    • Batteries, heavy duty, maintenance free, 1,500 CCA
    • Diagnostic connector
    • Horn, electric
    • Lights, halogen, 2 front and 2 rear
    • Starter, electric, 12 volt
  • Operator Station
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, retractable 76 mm (3 in)
    • Foot pads, dash
    • Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
    • Slope Indicate
    • Throttle switch, rotary
    • Eco mode
    • Controls, seat mounted, fore/aft adjustment
    • Armrests, adjustable
    • Mirror, rearview, inside
    • Single pedal combining deceleration and braking functions
    • Independent forward/reverse speed settings
    • Power port, 12 volt
    • Coat hook
    • Storage compartment
    • Cup holder
    • Floor mat, rubber, heavy duty
  • Hydraulics
    • Hydraulics, 3 valve
    • Load sensing hydraulics
    • Single lever, three function control
    • Hydraulic pump and oil
    • Stable blade control
  • Power Train
    • Cat C4.4 ACERT diesel engine, turbocharged, Tier 4 Final certified with aftertreatment
    • Aftercooler, Air-to-Air (ATAAC)
    • Aluminum bar plate cooling system (radiator, power train)
    • Air cleaner with precleaner, automatic dust ejection and under-hood intake
    • Dual path, closed-loop hydrostatic transmission
    • Electric fuel priming pump
    • Fuel/water separator
    • Automatic Traction Control
  • Undercarriage
    • SALT Undercarriage
    • 6 roller track frame
    • Track rollers, lifetime lubricated
    • Carrier rollers
    • Track adjusters, hydraulic
    • Guards, front/rear guiding
    • Master link
  • Other Standard Equipment
    • Cat Product Link PL631 Satellite/PL641 Cellular
    • C-Frame, VPAT, hydraulic cylinders and lines
    • Lockable engine enclosures
    • Front pull device
    • Rigid drawbar
    • Ecology drains (engine, power train and implement oil and engine coolant)
    • Scheduled oil sampling ports (engine, power train implement oil)
    • Vandalism protection
    • Heavy duty crankcase guard
  • Antifreeze
    • Extended life coolant, –37° C (–35° F)

Optional Equipment

  • Electrical
    • Integrated four front halogen lights, two rear halogen lights
  • Power Train
    • Drive, auxiliary
    • Installation, winch
  • Undercarriage
    • Track Pairs, XL: – Track, 406 mm (16 in) MS SystemOne
    • Track Pairs, LGP: – Track, 635 mm (25 in) MS SystemOne – Track, 762 mm (30 in) MS SystemOne
  • Operator Station
    • Cab with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
    • Radio, AM/FM, Bluetooth
    • Sound suppression
  • Hydraulics
    • Hydraulics, 4 valve for use with ripper
    • Hydraulics, 4 valve for use with winch
  • Guards
    • Guard, rear, heavy duty
    • Grill, radiator, heavy duty
    • Guard, track guiding, center
    • Guard, track roller, full length
    • Screen, rear, cab
    • Screen, side, cab
    • Screen, rear, canopy
    • Screen, front and doors, canopy
    • Sweeps, front
    • Sweeps, rear
  • Blades
    • VPAT XL blade
    • VPAT LGP blade
    • VPAT Intermediate blade
  • Rear Attachments
    • Drawbar, towing
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
  • Rear Attachment Control
    • Control, ripper
    • Control, winch
    • Control, ripper and winch
  • Machine Control And Guidance
    • Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
    • Power Pitch blade control
  • Starting Aids
    • Heater, engine, coolant, 120 volt
    • Starting aid, ether
  • Other Attachments
    • Machine Security System
  • Antifreeze
    • Extended life coolant, –50° C (–58° F)
  • Field Installed Attachment
    • Winch, hydrostatic